The AGT-SSCM53 is a heavy-duty skid steer-mounted concrete mixer attachment designed to streamline on-site mixing and transport of concrete. With a 12.36 cubic-foot (≈ 0.53 m³) capacity, built-in bag cutter, and robust galvanized steel construction, this attachment offers efficient mixing, bag splitting, and clean discharge in a compact form.
Key Features:
-
12.36 cu ft bucket capacity for ample mixing volume.
-
Operating pressure: 16-21 MPa (≈ 2,320-3,045 PSI) and hydraulic flow range ~75-140 L/min.
-
Built-in bag cutter to easily split mortar bags on site.
-
Galvanized steel construction and top-grade materials for long service life.
-
Universal skid steer mounting plate (45" × 19") for easy hookup.
Benefits:
-
Allows mixing and transporting concrete directly with your skid steer, reducing labor and time.
-
Designed to minimize spillage and waste thanks to full-volume design and secure build.
-
Bag cutter feature speeds up material feed and improves workflow on site.
-
Built robustly for continuous job-site use with minimal downtime.
Applications:
-
Ideal for construction, utility, and site-prep projects where mobile concrete mixing is required.
-
Suited for contractors, rental fleets, and general-purpose job-site equipment.
-
Compatible with skid steer loaders capable of providing the required hydraulic flow and pressure.
Technical Details:
| Working Weight | 1000 lbs |
| Working Pressure | 210PSI |
| Working Flow | 13-24 GPM (50-90 L/min) |
| Impact Rate | 500-800 BPM |
| Impact Energy | 785 Joule |
| Chisel Diameter | 3'' (75mm) |
| Hydraulic Hose Diameter | 1/2" |
| Package Dimensions | 50.39" × 24.01" × 23.62" |
| Shipping Weight | 1091.28 lbs |
Solutions to common problems
- The hammer is not working after the installation
-
Improper bushing replacement. Refit the inner bushing. Make sure to use the original.
-
Quick couplers are installed wrong. Check connectors and replace them as needed.
-
Supply hoses have been reversed. The pressure line from the pump must be connected to the port marked IN. The return line connects to the port marked OUT.
-
Nitrogen pressure is too high, Release nitrogen and recharge as needed.
- Why does the hydraulic hammer suddenly stop working?
- The backhead pressure is too high. Release nitrogen and recharge as specified.
- The backhead is filled with oil. Disassemble the back head and replace the seal.
- The control valve is stuck. Disassemble and clean the valve, and replace the worn valve.
- Oil flow is not sufficient. Repair the pump, and adjust the hammer valve.
Nitrogen Pressure
Product Overview
Designed for use with 45-100HP medium to large skid steer loaders, the AGT-SSHH-750A hydraulic breaker hammer gets hard jobs done with ease.
With a 3’’ (75mm) diameter moil point chisel, this hammer is perfect for medium to large jobs including construction, demolition, excavating, and landscaping.
An impact rate of 500-800 BPM combined with 223-240 PSI working flow pressure makes this a versatile and efficient breaking hammer for breaking driveways, demolishing concrete structures, and digging holes.